Servo motor power cables
Shielded 4G and 4G+2 constructions for Yaskawa, Fanuc, KUKA, ABB and Siemens drives, connectors fitted and ready to plug.
UL AWM · 600 V · 4G1.5 to 4G6Specs and optionsEncoder and feedback cables
Feedback cables for absolute and incremental encoders, resolvers and motor temperature sensors: twisted pairs under an overall screen, with the power pair for the encoder in a heavier cross-section so the supply holds at the far end of a long run.
TP screened · 0.14 to 0.34 mm²Typical construction
How it is usually built
- Twisted pairs 0.14 to 0.25 mm² for signals, 0.5 to 1.0 mm² for the encoder supply
- Pairs screened individually where the protocol asks for it, plus an overall braid and foil
- Low-capacitance insulation for EnDat, BiSS, Hiperface DSL and SSI runs
- M12, M17 and M23 feedback connectors, D-sub, or the drive's own plug
Ratings are the cable maker's for the construction chosen; the construction, the test scope and the documentation are confirmed in your quotation.
Joint and dress pack torsion cables
Torsion-rated hybrid bundles routed through the arm or an external dress pack, cut, terminated and ready to install.
±180°/m · 5M cycles · PURSpecs and optionsTeach pendant cables
Hybrid power and data cables with E-stop circuits and strain relief, straight or coiled, with the OEM connector fitted.
Hybrid · 5 to 20 m · IP65 plugsSpecs and optionsSensor and I/O cables
M8 and M12 overmolded cordsets, Y-splitters and distribution boxes for grippers, vision and safety sensors.
M8 / M12 · IP67 · A, B and D-codedSpecs and options